Posted: November 24th, 2022
4. Calculations: Now using the equation V = IR, calculate the expected values of the currents and voltages of all resistors tested above. Create new tables for these results. Use only the voltage supplied by the 1.5V battery and the resistance values for the three resistors. When using the current in calculations (V=IR), you must convert mA to A by dividing the mA value by 1000. For example, in a circuit with a 1.5V battery and a 500 Ω resistor, what is the expected current? V = IR or I = V/R = 1.5/500 = 0.003A or 3 mA.
Series Resistors: Req = R1 + R2 + R3. First, find the equivalent resistance Req for all resistors involved. Then find the current through Req. The voltage for each resistor can be calculated using the resistor value, current and the equation V=IR.
Parallel Resistors: 1/Req = 1/R1 + 1/R2 + 1/R3 or Req = (R1 x R2 x R3) / (R1 + R2 + R3). Using the measured voltage, calculate the currents for each resistor. The total circuit current, I, is simply the sum of the currents through each resistor I1, I2, and I3.
Combination: First, find the equivalent resistance R23 of the parallel resistors, then the equivalent resistance Req for the entire circuit. Next, find the current through Req, and this should be the current through R1 and R23. Using that current, find voltages across R1 and R23.Then you can find the current through R2 and R3.
Place an order in 3 easy steps. Takes less than 5 mins.